DMC1系列双联阀
DM1CDB21A3X
- 与适当的安全控制一起使用时，冗余控制可以实现Cat 4 , PL e。
- 动态监控和气体控制功能集成到两个相同的阀芯中，适用于 4 类安全等级应用。
- 提升阀芯设计具有耐污、磨损补偿功能，可实现快速响应和高流量
- PTFE 备用活塞环增强了阀门的耐用性。无论有无润滑，均可运行
- 如果两个电磁阀断电后异常情况自行清除，阀门将处于准备运行状态。
- 包括一个带有常开 (NO) 和常闭 (NC) 触点的压力开关向控制系统提供状态反馈，指示阀门是否处于“准备运行”状态或出现异常功能。
- 必须集成到机器控制中，以防止在出现故障之前发出运行信号已在阀门中清除。该指示器仅报告状态，不是锁定功能的一部分。
- 高流量、防堵塞消音器
- 阀门两侧均有进气口和排气口，便于现场安装接线。
- SISTEMA 库可供下载
产品信息
| Series | DMC1 Series |
| Valve Function | Redundant 3/2 Single Solenoid |
| Construction | Dual Poppet |
| Actuation | Electrical |
| Soft Start | Not Included |
| Lockout | Not Included |
| Monitoring | Internal |
| Feedback | Not Included |
| Reset | Automatic |
| Voltage | 24 VDC |
| Thread Type | G |
| Inlet Size | 3/8" |
| Outlet Size | 3/8" |
| Exhaust Size | 3/4" |
| Basic Size | 2 |
| Ports 1-2 Flow | 2.2 Cv (21964.8 Nl/min) |
| Ports 2-3 Flow | 3.6 Cv (35942.4 Nl/min) |
| Power Consumption | 5.8 watts nominal, 6.5 watts maximum |
| Solenoid Connection | EN 175301-803 Form A |
| Operating Pressure Max | 150 psig (10.3 bar) |
| Pilot Supply | Internal |
| Height | 9.74 in (247.5 mm) |
| Length | 4.50 in (114.3 mm) |
| Width | 4.79 in (121.6 mm) |
| Weight | 5.3 lb (2.4 kg) |
| Mounting | Base Mount |
| Ambient Temperature | 15 to 122 F (-10 to 50 C) |
| Media Temperature | 40 to 175 F (4 to 80 C) |
| Flow Media | Filtered, lubricated or unlubricated (mineral oils according to DIN 51519, viscosity classes 32-46) |
| Valve Body Material | Cast Aluminum |
| Poppet/Spool Material | Acetal and Stainless Steel |
| Seal Material | Buna-N |
| Safety Category | Category 4 |
| PL Rating | PL e |
| Safety Integrity Level | SIL 3 |
| DGUV Certification | Yes |
| CE Certification | Yes |
| EAC Declaration | Yes |
| CSA/UL Certification | Yes |
+
DMC1系列双联阀